Retail Price:
Our Price:
Save:
The 3D Tractors are available with a gear drive transmission with eight speeds in both forward and reverse directions. It includes a drivetrain built with heavy-duty components like those used in some John Deere utility tractors. These components ensure a rugged and durable machine.
Column-mounted forward and reverse lever for increased efficiency and comfort when changing directions.
Fender-mounted gear shift lever for more comfortable shifting
The tractor will only start with the forward/reverse, range, and gear shift levers in neutral.
The engine will shut off if the operator leaves the seat unless the forward/reverse, range, and gear shift levers are in neutral.
The engine will shut off if the operator leaves the seat and the power take-off (PTO) is engaged.
Forward/reverse lever
Range lever
Operator station
Key John Deere advantage - A column-mounted forward/reverse lever is a more ergonomic alternative to the floor-mounted design of the competition. Having controls at the operator’s fingertips allows for an effortless change in directions at any time.
Gear shift lever
The 3D is much easier and more comfortable to operate when shifting between gears. The fender-mounted gear shift lever provides the ideal location and placement for the operator’s arm.
Clean and simple operator's station
An uncluttered design gives operators of all sizes plenty of room to be comfortable. Color-coded controls are located on either side of the operator.
Operator presence system:
Left-side step for easy entry/exit
Seat
The thick, soft padding on this seat provides a smooth and comfortable ride.
Instrument panel
Easy-to-read instrument panel includes the following:
Rear-mounted fuel tank and gauge
All 3D Series Tractors come standard with a fuel gauge that is easy to read from the operator's station to ensure operators do not run out of fuel. The fuel tank is also located on the rear of the tractor to allow for easy refill.
Operator presence switch (OPS) in seat:
Park brake
Instrument panel has an indicator light for the park brake.
Roll-Gard ROPS
3D Series Tractors are equipped with Roll-Gard ROPS. These folding ROPS meet the ASABE standards for compact utility tractors.
NOTE: The use of seat belts is recommended at all times when operating the 3D Series Tractor with the folding ROPS upright.
An optional canopy is available to help protect the operator from the elements.
Optional rear SCVs
3D Series Tractors can be equipped with a field-installed rear hydraulic remote kit, providing two additional hydraulic spools on the back of the tractor. This kit can be field installed on a tractor with a loader or without a loader.
The functions are completely separate from the loader. These rear remotes can be hooked up to a wide variety of implements and attachments such as follows:
This versatile kit gives 3D Series Tractor operators the options they desire for putting their tractors into a wide range of tasks.
The first spool is equipped with a float position, giving the operator the ability to contour the landscape and improve the final grade with certain implements.
NOTE: Neither of the spools in this kit are equipped with a detent position; therefore, they should not be hooked up to anything with a motor, as the valve was not designed to be run open. The kit is designed for momentary, on-demand hydraulic flow such as moving a cylinder.
The approximate installation time is 1 hour to 1.5 hours.
iMatch Quick-Hitch (LVB25976)
One of the greatest operator concerns involves difficulty in attaching tractor implements. John Deere has addressed this issue with the iMatch Quick-Hitch.
The iMatch Quick-Hitch provides easy hookup and a guaranteed fit for all Category 1 implements that are designed to meet the American Society of Agricultural and Biological Engineers (ASABE) Category 1 Standard S278.6 for quick-attach hitches.
NOTE: The bushing set can be seen in the picture above. These bushings allow the hooks on the iMatch and the pins on the implement to fit together properly. All other implements (box blades, tillers, rear blades, etc.) will require a set of bushings to enlarge the pin to fit with the iMatch hooks. Bushings of different lengths can be found in the parts system or through a bushing supplier (see dimensions below).
Regular service and maintenance are essential to the performance, productivity, and longevity of the tractor.
Easy access to most regular service points minimizes service time.
Tractors are equipped with extensive onboard self-diagnostic capabilities and are fully compatible with the John Deere-exclusive Service ADVISOR™ system.
Hydraulic oil service interval increased to 1200 hours when using Hy-Gard™ products. Hydraulic oil filter will need to be changed every 400 hours.
Fuel tank is located on the rear of the tractor to allow for easy access when fueling.
Fuel tank on rear of the tractor
Easy access to engine compartment
Daily service is quick and easy
All items in the daily service schedule can be performed without the use of tools:
Engine oil, hydraulic oil, coolant level, and the water separator can be conveniently accessed.
The engine can be easily accessed by simply raising the hood for more periodic maintenance checks.
NOTE: Always refer to the operator’s manual for complete maintenance and service recommendations.
Key Specs | 3025D Current Model |
| Engine power (gross) | 18.2 kW 24.7 hp |
| Power take-off (PTO) power | 14.9 kW 20 hp |
| Steering hydraulics | 14.4 L/min 3.8 gpm |
| Implement hydraulics | 19.2 L/min 5.1 gpm |
| Hitch type | Category 1 |
| Lift capacity, 24-in. behind link arms | 757.4 kg 1670 lb |
| Standard transmission; forward/reverse | 8F/8R synchromesh shuttle shift gear transmission |
| Cruise control | No |
| Approximate shipping weight (open-station; cab) | 1260 kg 2778 lb |
| Wheelbase | 157.4 cm 62 in. |
Engine | |
| Family | |
| Manufacturer | Yanmar |
| Engine model | 3TNV88F-EPJPT |
| Engine power (gross) | 18.2 kW 24.4 hp |
| Power take-off (PTO) power | 14.9 kW 20 hp |
| Rated engine speed | 2400 rpm |
| Type | |
| Injection pump type | Direct injection |
| Aspiration | Natural |
| Emissions compliance | Final Tier 4 |
| Cylinders/displacement | 3 / 1.64 L 3 / 100.2 cu in. |
| Number of cylinders | Three |
| Cylinder liners | Cast-in-block |
| Bore and stroke | 88 x 90 mm 3.46 x 3.54 in. |
| Compression ratio | 19.1:1 |
| Lubrication | Pressurized |
| Cooling system | Water pump |
| Air cleaner | Dual element |
| Engine torque at rated speed | 72.4 Nm 53.4 lb-ft |
| Fuel tank capacity | 36.7 L 9.7 U.S. gal. |
Electrical | |
| Battery size | 600 CCA |
| Alternator (12-V) | 55 amp |
| Starter size | 1.4 kW 1.9 hp |
Fuel system | |
| Type | Direct injection |
| Fuel consumption | |
Transmission | |
| Standard transmission; forward/reverse | 8F/8R synchromesh shuttle shift gear transmission |
| Optional transmission; forward/reverse | |
| Left-hand reverser | Yes |
| Transmission gear ranges | 4 gears and 2 ranges |
| Final drive | Spur Gear |
| Brakes | Wet disc |
| Steering | Power steering |
| Clutch, wet/dry | |
| Clutch disk diameter wet clutch | |
| Axle capacity | Front 880 kg 1940 lb Rear 1600 kg 3527 lb |
| Creeper | No |
| Cruise control | No |
| Differential lock | Yes |
| Drawbar maximum vertical load | |
Hydraulics | |
| Type | Open center |
| Pump rated output | Steering 14.4 L/min 3.8 gpm Implement 19.2 L/min 5.1 gpm 33.6 L/min 8.9 gpm |
| Pump type | Single gear |
| Maximum operating pressure | 172.4 bar 2500 psi |
| Draft control sensing | Position control |
| Remote control valves available | Up to two (optional) |
3-point hitch | |
| Type | Category 1 |
| Lift capacity, 24-in. behind link arms | 757.4 kg 1670 lb |
Power take-off (PTO) | |
| Standard | 540 rpm at 2400 rpm |
| Optional | |
| Control | Mechanical |
| Clutch | Transmission |
| Brake (for mid and rear PTO) | Wet disc |
| Engagement method | |
Fluid capacities | |
| Crankcase with filter | 4.5 L 4.8 qt |
| Transmission and hydraulic system | 33 L 34.8 qt |
Final drive | |
| Type | Bull Gear |
| Differential lock | |
Operator station | |
| Rollover protective structure | Type Foldable ASABE S478 |
| Platform - flat/straddle | Semi-flat |
| Gear shift location - console/floor | Right-hand side |
Cab | |
| Compliance | |
| Visibility | |
| Air conditioning, temperature differential | |
| Doors | |
| Noise rating | |
| Seat equipment | |
Dimensions | |
| Wheelbase | 157.4 cm 62 in. |
| Front axle clearance | 35 cm 14 in. |
| Turning radius with brakes | 1.63 m 5.3 ft |
| Turning radius without brakes | |
| Limited slip differential | |
| Approximate shipping weight (open-station; cab) | 1260 kg 2778 lb |
| Height | |
Tires | |
| Front | Farm - 7-14 Turf - 27x8.5-15 R4 - 25x8.5-14 |
| Rear | Farm - 11.2-24 Turf - 41x14-20 R4 - 15-19.5 |
| Front tread range | |
| Rear tread spacing | |
Miscellaneous | |
| Toolbox | Yes |
| Tilt steering wheel | No |
| 12-V Outlet | No |
Additional information | |
Tool storage products on wall
Tool storage products on 3E Tractor
5WS812430 rollover protective structure (ROPS) rack
5WS812430 ROPS rack on 3E
5WS812435 universal mount
5WS812460 chainsaw holder
5WS812450 two tool holder
5WS812455 four tool holder
5WS812480, 5WS812485, and 5WS812490 on ROPS rack
Overview
The John Deere tool storage solutions provide the tractor customer with customizable tool storage to carry commonly used landscaping tools and power equipment on the tractor without having to make multiple trips to the garage.
Benefits
5WS812466 leaf blower holder
5WS812470 chain box
5WS812475 on ROPS rack
5WS812475
Tool storage products on wall
Tool storage products on 3E Tractor
5WS812430 rollover protective structure (ROPS) rack
5WS812430 ROPS rack on 3E
5WS812435 universal mount
5WS812460 chainsaw holder
5WS812450 two tool holder
5WS812455 four tool holder
5WS812480, 5WS812485, and 5WS812490 on ROPS rack
Overview
The John Deere tool storage solutions provide the tractor customer with customizable tool storage to carry commonly used landscaping tools and power equipment on the tractor without having to make multiple trips to the garage.
Benefits
5WS812466 leaf blower holder
5WS812470 chain box
5WS812475 on ROPS rack
5WS812475
Tool storage products on wall
Tool storage products on 3E Tractor
5WS812430 rollover protective structure (ROPS) rack
5WS812430 ROPS rack on 3E
5WS812435 universal mount
5WS812460 chainsaw holder
5WS812450 two tool holder
5WS812455 four tool holder
5WS812480, 5WS812485, and 5WS812490 on ROPS rack
Overview
The John Deere tool storage solutions provide the tractor customer with customizable tool storage to carry commonly used landscaping tools and power equipment on the tractor without having to make multiple trips to the garage.
Benefits
5WS812466 leaf blower holder
5WS812470 chain box
5WS812475 on ROPS rack
5WS812475
Tool storage products on wall
Tool storage products on 3E Tractor
5WS812430 rollover protective structure (ROPS) rack
5WS812430 ROPS rack on 3E
5WS812435 universal mount
5WS812460 chainsaw holder
5WS812450 two tool holder
5WS812455 four tool holder
5WS812480, 5WS812485, and 5WS812490 on ROPS rack
Overview
The John Deere tool storage solutions provide the tractor customer with customizable tool storage to carry commonly used landscaping tools and power equipment on the tractor without having to make multiple trips to the garage.
Benefits
5WS812466 leaf blower holder
5WS812470 chain box
5WS812475 on ROPS rack
5WS812475
Tool storage products on wall
Tool storage products on 3E Tractor
5WS812430 rollover protective structure (ROPS) rack
5WS812430 ROPS rack on 3E
5WS812435 universal mount
5WS812460 chainsaw holder
5WS812450 two tool holder
5WS812455 four tool holder
5WS812480, 5WS812485, and 5WS812490 on ROPS rack
Overview
The John Deere tool storage solutions provide the tractor customer with customizable tool storage to carry commonly used landscaping tools and power equipment on the tractor without having to make multiple trips to the garage.
Benefits
5WS812466 leaf blower holder
5WS812470 chain box
5WS812475 on ROPS rack
5WS812475
Tool storage products on wall
Tool storage products on 3E Tractor
5WS812430 rollover protective structure (ROPS) rack
5WS812430 ROPS rack on 3E
5WS812435 universal mount
5WS812460 chainsaw holder
5WS812450 two tool holder
5WS812455 four tool holder
5WS812480, 5WS812485, and 5WS812490 on ROPS rack
Overview
The John Deere tool storage solutions provide the tractor customer with customizable tool storage to carry commonly used landscaping tools and power equipment on the tractor without having to make multiple trips to the garage.
Benefits
5WS812466 leaf blower holder
5WS812470 chain box
5WS812475 on ROPS rack
5WS812475
Tool storage products on wall
Tool storage products on 3E Tractor
5WS812430 rollover protective structure (ROPS) rack
5WS812430 ROPS rack on 3E
5WS812435 universal mount
5WS812460 chainsaw holder
5WS812450 two tool holder
5WS812455 four tool holder
5WS812480, 5WS812485, and 5WS812490 on ROPS rack
Overview
The John Deere tool storage solutions provide the tractor customer with customizable tool storage to carry commonly used landscaping tools and power equipment on the tractor without having to make multiple trips to the garage.
Benefits
5WS812466 leaf blower holder
5WS812470 chain box
5WS812475 on ROPS rack
5WS812475
Tool storage products on wall
Tool storage products on 3E Tractor
5WS812430 rollover protective structure (ROPS) rack
5WS812430 ROPS rack on 3E
5WS812435 universal mount
5WS812460 chainsaw holder
5WS812450 two tool holder
5WS812455 four tool holder
5WS812480, 5WS812485, and 5WS812490 on ROPS rack
Overview
The John Deere tool storage solutions provide the tractor customer with customizable tool storage to carry commonly used landscaping tools and power equipment on the tractor without having to make multiple trips to the garage.
Benefits
5WS812466 leaf blower holder
5WS812470 chain box
5WS812475 on ROPS rack
5WS812475
Tool storage products on wall
Tool storage products on 3E Tractor
5WS812430 rollover protective structure (ROPS) rack
5WS812430 ROPS rack on 3E
5WS812435 universal mount
5WS812460 chainsaw holder
5WS812450 two tool holder
5WS812455 four tool holder
5WS812480, 5WS812485, and 5WS812490 on ROPS rack
Overview
The John Deere tool storage solutions provide the tractor customer with customizable tool storage to carry commonly used landscaping tools and power equipment on the tractor without having to make multiple trips to the garage.
Benefits
5WS812466 leaf blower holder
5WS812470 chain box
5WS812475 on ROPS rack
5WS812475
Tool storage products on wall
Tool storage products on 3E Tractor
5WS812430 rollover protective structure (ROPS) rack
5WS812430 ROPS rack on 3E
5WS812435 universal mount
5WS812460 chainsaw holder
5WS812450 two tool holder
5WS812455 four tool holder
5WS812480, 5WS812485, and 5WS812490 on ROPS rack
Overview
The John Deere tool storage solutions provide the tractor customer with customizable tool storage to carry commonly used landscaping tools and power equipment on the tractor without having to make multiple trips to the garage.
Benefits
5WS812466 leaf blower holder
5WS812470 chain box
5WS812475 on ROPS rack
5WS812475
Tool storage products on wall
Tool storage products on 3E Tractor
5WS812430 rollover protective structure (ROPS) rack
5WS812430 ROPS rack on 3E
5WS812435 universal mount
5WS812460 chainsaw holder
5WS812450 two tool holder
5WS812455 four tool holder
5WS812480, 5WS812485, and 5WS812490 on ROPS rack
Overview
The John Deere tool storage solutions provide the tractor customer with customizable tool storage to carry commonly used landscaping tools and power equipment on the tractor without having to make multiple trips to the garage.
Benefits
5WS812466 leaf blower holder
5WS812470 chain box
5WS812475 on ROPS rack
5WS812475
BLV10623 Front weight bracket extension kit shown
LVB24952 Front weight bracket extension kit shown on 3E Tractor
Front weight brackets allow the operator to hang Quik-Tatch™ weights on the front of the tractor maintaining stability when using rear 3-point hitch implements and a loader is not installed on the tractor. Proper ballast is essential for safety and to ensure the durability of the tractor components.
Benefits
*NOTE: Front weight brackets and weights are not compatible when the loader is installed on the tractor
The forward-lighting kit provides extra visibility when working in dark conditions. Lights attach to the brush guards located on the rollover protective structure (ROPS). Each kit contains two lights.
NOTE: Requires BLV10400 warning light brush guard kit and LVB26026 light kit harness. Not compatible with LVB25547 rear work light kit (1023E).
NOTE: Requires BLV10400 warning light brush guard kit. Not compatible with LVB25547 rear work light kit (1025R, 2025R, 2032R, 2038R, 3025E, 3032E, 3038E, 4105, 4044M, 4052M, 4066M).
NOTE: Requires BLV10620 premium warning light brush guard kit. Not compatible with LVB25547 rear work light kit (3033R, 3039R, 3046R, 4044R, 4052R, 4066R).
Rollover protective structure (ROPS) mounted LED work lights
An optional LED work light kit is available for all open-station compact utility tractors. These lights provide extra visibility when working in dark conditions and have 180-degree rotation to face forward or backward. The kit contains two lights and the mounting hardware required for installation.
This lighting kit is mounted to the warning light brush guard kit, which is mounted to the ROPS and requires attachment BLV10400 for installation.
The halogen work light kit attachment is still available (LVB25546).
Shown on 4000 TEN Series Tractor
ROPS warning-light brush guards protect turn signal/warning lights from damage caused by low branches on trees.
For open-station tractors only.
Two guards included in each kit.
Shown on 4000 TEN Series Tractor
ROPS warning-light brush guards protect turn signal/warning lights from damage caused by low branches on trees.
For open-station tractors only.
Two guards included in each kit.
Rear work light
This kit provides light to the rear of the tractor for evening work.
For open-station tractors only, this kit contains individual light.
Allow 30 minutes to install.
NOTE: Kit includes one rear light.
NOTE: Both the rear- and forward-work lights are compatible together and with the light-brush guard kits. The light kit contains a two-to-four pigtail that plugs into the main harness, as if only plugging one set of lights, providing two sets of plugs to use for forward and rear-work lights. The forward light is installed on top of the brush guard, and the rear light is installed inside the ROPS using the bolt holding the light and brush guard on.
NOTE: For 102E3 and 1026R Tractors – kit interference during backhoe operations (mounted inside ROPS) – use LVB25546 forward-light kit as an alternative.
Standard canopy mounted to 5M Series ROPS
The standard canopy attaches to the tractor's rollover protective structure (ROPS) to protect operators from inclement weather.
Additional mounting brackets and hardware bundles are required to install the canopy to the ROPS.
Standard canopy kit
Deluxe canopy kit
Mounting brackets and hardware bundles are required to adapt a canopy to the tractor rollover protective structure (ROPS).
BXX10277 License plate kit shown
License plate kits allow an operator to display a license plate on the tractor in order to meet local laws and regulations in which to drive on public roads.
Rear wheel weight
UC13499 32-kg (70-lb) cast-iron rear wheel weight (inner and outer face shown)
BM17976 22.7-kg (50-lb) plastic-shell rear wheel weight with hardware, not stackable (inner and outer face shown)
BM17972 22.7-kg (50-lb) cast-iron wheel weight (inner and outer face shown)
BM17965 28.1-kg (62-lb) rear wheel weight (inner and outer face shown)
T19293 48.1-kg (106-lb) rear wheel weight (inner and outer face shown)
BM17968 22-kg (48.5-lb) wheel weight (inner and outer face shown)
Wheel weights provide extra traction and stability by adding ballast to the rear wheels.
Click here to view the Wheel Weight Compatibility Guide.
Tire chains provide added traction in snowy and icy conditions.
Tire chains provide added traction in snowy and icy conditions.
Safety chain support
One of the greatest operator concerns involves difficulty in attaching tractor implements. John Deere has addressed this issue with the iMatch Quick-Hitch:
NOTE: All implements (box blades, tillers, rear blades, landscape rakes, etc.) require a set of bushings to enlarge the pin to fit with the iMatch hooks. Bushings of different lengths can be found in the parts system or through a bushing supplier.
iMatch Quick-Hitch
iMatch Quick-Hitch with 3-Point Hitch Disk Harrow
One of the greatest operator concerns involves difficulty in attaching tractor implements. John Deere has addressed this issue with the iMatch Quick-Hitch.
The iMatch Quick-Hitch provides easy hookup and a guaranteed fit for all Category 1 implements designed to meet the ASAE Category 1 Standard S278.6 for quick-attach hitches.
NOTE: All implements (box blades, tillers, rear blades, landscape rakes, etc.) require a set of bushings to enlarge the pin to fit with the iMatch hooks. Bushings of different lengths can be found in the parts system or through a bushing supplier (see dimensions below).
iMatch dimensions
| Dimensions designated | Millimeters (minimum) |
Millimeters (maximum) |
| 'A' lower socket inside span | 686.56 |
689.61 |
| 'B' lower socket width | 27.94 |
29.46 |
| 'C' lower socket diameter | 38.1 |
38.61 |
| 'D' upper hook vertical spacing | 375.41 |
377.96 |
iMatch implement dimensions
| Dimensions designated | Millimeters (minimum) |
Millimeters (maximum) |
| 'A' lower hitch pin or adapter outside diameter | 36.33 |
36.58 |
| 'B' lower hitch pin inner shoulder spread | 681.0 |
684.3 |
| 'C' lower hitch pin outer shoulder spread | 750.83 |
753.88 |
| 'D' lower hitch pin inner/outer shoulder diameter | 50.55 |
63.75 |
| 'E' coupler mast pin diameter | 31.50 |
31.75 |
| 'F' coupler mast pin vertical spacing | 379.48 |
382.53 |